Portable edge banding machine can convert workplaces at will

    The portable edge banding machine can be directly applied to the plate type straight and curved irregular frame edge sealing work. When the portable wood edge banding machine is installed with the fixed bracket accessory, the use mode is similar to the traditional curved straight line edge banding machine, and the portable edge banding machine It is also suitable for edge banding of different materials: melamine (impregnated) paper, veneer, plastic (pvc or abs). The portable edge banding machine has the following advantages: streamlined, light, high quality and beautiful price. The portable edge banding machine can convert the workplace at will, arrive at the decoration site for on-site construction, and is suitable for the decoration industry.
    First, the portable edge banding machine features:
    1. The edge banding machine is relatively small and flexible, and can be converted to the workplace at will, to reach the decoration site for on-site work.
    2. Double-sided coating system, double-sided coating, and the glue is even and rapid, the glue between the edge strip and the board is very firm.
    3. Automatically break the belt, when sealing the straight plate, the plate is pressed against the travel switch. When the curve is closed, the pedal is broken when the pedal is pressed.
    4. The inner arc of the smaller radius, the S-shaped arc, the wavy arc, etc. cannot be sealed with the normal edge-sealing speed. At this time, the stepless speed regulation is used, and the speed is slowed down, which can realize the curve edge-sealing. It is very convenient to use. Up
    5. High flexibility, so the sealing of large wooden boards is more practical, does not require multi-person operation, and is convenient and quick to operate.
    6. The portable edge banding machine can be directly applied to the plate type straight and curved irregular frame edge banding machine. The edge banding machine is also suitable for the edge banding of different materials.
    Second, the portable edge banding machine function:
    1. Can change the workplace at will, arrive at the renovation site for on-site construction, suitable for the decoration industry.
    2. Thermostat: The temperature is automatically controlled according to the sol temperature required for the edge band and the hot melt.
    3. The applicable width of the edge band is increased to 10mm-60mm.
    4. Special plastic basin insulation design; increased capacity and short warm-up time.
    5. Governor: Adjust the machine speed according to different glue and pressure belt.