Hydraulic clamp carrier greatly increase work productivity

   Hydraulic clamp carrier greatly increase work productivity
   Compared with the traditional mechanical tightening, hydraulic clamp carrier has the following three advantages:
   First, there is data that the use of hydraulic clamps for the briquetting machine saves 90-95% of the time compared to the traditional mechanical tightening, which can effectively reduce the production cycle and improve the efficiency of the briquetting machine, thus increasing the production cost. Reduced.
   Second, the second important feature of the hydraulic clamp carrier system is that it can achieve very high positioning accuracy. The key is that the clamping force remains constant during positioning and clamping. This ensures consistent processing quality under the same process. The rate of scrap due to deformation will be minimal.
   Third, the third advantage of the hydraulic clamp carrier frame is that it is more suitable for the processing parts to be compact and space-limited when using manual clamping (the clamping position is far from the machine table, it is difficult for human hands to touch). The hydraulic clamp carrier can be solved by the Weifang press cake machine through the operation of the reversing valve, which is very automatic and automatic cake grabbing machine, which can realize the simultaneous clamping and processing of multiple parts in one clip.
   Hydraulic clamp carrier frame enables multi-station clamping and greatly improves work productivity. Compared with mechanical fixtures, the hydraulic pallets have a high initial investment cost and require a power unit. However, in the long run, this investment is interesting. In the future, product changeover only requires a simple adjustment of the layout and can meet the production needs.
    Contour sizes often vary when holding workpiece blanks. After the workpiece reference is determined, if the irregular contour is supported by the fixed spacer, when the contour size is too small, the spacer will not be able to contact the workpiece, and if the contour size is too large, the contact will be too early, and the workpiece will be deformed when pressed or processed. The hydraulic clamp carrier utilizes an auxiliary support cylinder. Before the hydraulic power is applied, the piston of the cylinder can be stopped at any point and surface of the blank contour under the action of the internal spring to ensure contact with the workpiece and conform to the contour.
   The piston position is locked after hydraulic power is applied. The locked auxiliary support cylinder acts as a fixed block for the workpiece, providing a counterforce to any pressing or cutting force in the opposite direction of the piston movement, providing additional support points without affecting the three-point plane positioning. . After the hydraulic clamp carrier is processed, the oil pressure is released, the workpiece is taken away, and the piston automatically returns to the full height.