Hydraulic Clamp Carrier to meet production needs

   Hydraulic Clamp Carrier to meet production needs
   Hydraulic Clamp Carrier has a bending device of a hot rolling mill work roll of a hydraulic piston cylinder unit, and the piston cylinder unit can transmit the bending roller force to the work roll bearing seat through the guide block, and the bending device should be improved by using one The piston-cylinder unit achieves the adjustment force to be used, the size of which is so small that it can be simply mounted in the assembly to be preset in the frame window and ensures a free choice of the backup roller bearing.
   Compared with the traditional mechanical tightening, Hydraulic Clamp Carrier of the hydraulic clamp has the following three advantages:
   First, there is data showing that the hydraulic clamp uses hydraulic Clamp Carrier to save 90-95% of the time compared with the traditional mechanical tightening, which can effectively reduce the production cycle and improve the efficiency of the briquetting machine, thus increasing the production cost. It is.
   Second, the second important feature of hydraulic Clamp Carrier system is that it can achieve very high positioning accuracy. The key to the hydraulic clamp is that the clamping force remains constant during positioning and clamping. This ensures consistent processing quality under the same process. The rate of scrap due to deformation will be minimal.
   Third, the advantage of the hydraulic Clamp Carrier is that it is more suitable for the processing parts to be compact and space-limited when using manual clamping (the clamping position is far from the machine table, it is difficult for human hands to touch). Hydraulic clamping can solve these problems by the operation of the reversing valve, which is very automatic and automatic, and it can realize the simultaneous clamping and processing of multiple parts in one clip.
    Hydraulic Clamp Carrier enables multi-station clamping and greatly improves work productivity. Compared with mechanical fixtures, the initial investment cost of hydraulic clamps is relatively high, and power units are required. However, in the long run, this investment is interesting. In the future, product changeover only requires a simple adjustment of the layout and can meet the production needs.