Maintenance of the portable edge banding machine is essential
Portable edge banding machine has overload protection tripping, and the thermal relay has not cooled down, can not be reset, solve the problem of overloading of the machine in time, wait for the thermal relay to cool, the end of the movable table exceeds the middle of the saw blade, the sawing length is not enough, the movable workbench will be Pull back to the front of the middle of the blade. When the emergency switch is pressed, the emergency switch turns to the right and returns to the original position.
The technology of the portable edge banding machine is also very classified due to the wide range and diversity of application fields. According to the form of the thermal transfer film, there are mainly two different types of thermal transfer edge banding machines, namely the technology of thermal transfer edge banding and digital thermal transfer edge banding machine. The technology of the portable edge banding machine is to print the pattern on the transfer carrier such as PET by special gravure printing machine by making the gravure electro-engraving plate. After the graphic printing is realized, the product is transferred directly on the technical machine of the thermal transfer edge banding machine. The transfer film production form has high production efficiency, but the pre-production cost is also very expensive.
Portable edge banding machine mainly meets a large number of products. Digital thermal transfer is printed by a special thermal transfer edge banding machine. The graphic is printed on the transfer paper, and the product is transferred by a heat transfer machine or other transfer machine. On the substrate, this model is lower in cost than the technology of the Yihe thermal transfer edge banding machine. The pre-preparation is more simplistic, but the production efficiency is limited, and it is mainly suitable for a small number of products with a quantity of raw products.
The lead screw is one of the components in the operation process and is essential for its maintenance. Secondly, it is necessary to clean the garbage around the drill to avoid the interference of surrounding impurities and to work effectively. Also remember to immediately add lubricating oil to the rolling part to avoid excessive wear and tear. After work, it is necessary to perform cleaning on the work surface and computer sawing. It adopts automatic touch control and man-machine integrated operation. The worker inputs the data that needs to be opened on the touch screen or PC, starts the machine, and the machine automatically runs the machine that needs to be processed to implement precise cutting.
The portable edge banding machine is equipped with preheating placement of the plate parts, and the edge banding of the winter processing plate is not firmly adhered. When the plate is heated and intermittently heated, it can reach the purpose of energy saving, and the woodworking independent research and development expandable multi-channel storage sideband unit is convenient. Storage side belts, auxiliary precision belt unit. The portable edge banding machine is equipped with precision feeding unit, automatic servo control, precise positioning, and the margin reserve is reduced to 3-5mm. Compared with the traditional edge banding machine, each company saves 20,000 to 80,000 yuan of edge sealing material per year. Cost price, equipped with automatic clean placement, reduced labor, improved texture, equipped with broken wire installation, can prevent damage to equipment caused by edge banding, shorten equipment defects and extend equipment life.