Introduction to the structural principle of hydraulic clamp

        Introduction to the structural principle of hydraulic clamp carrier
        Hydraulic clamp carrier generally do not require very complicated fixtures in CNC milling, and only require simple positioning and clamping.
        In order to ensure that all the surfaces to be processed that need to be completed in the process are fully exposed, the fixture should be opened as much as possible because a certain safety distance should be maintained between the clamping mechanism components and the working surface, and the clamping mechanism components are required. The low and low can be used to prevent the hydraulic clamp frame from interfering with the milling machine spindle sleeve or the knife sleeve and the cutting tool during processing.
       The rigidity and stability of the hydraulic clamp carrier should be good. Try not to change the design of the clamping point during the machining process. When the clamping point is to be replaced during the machining process, special care must be taken not to replace the clamp due to the replacement of the clamping point. Or the positioning accuracy of the workpiece.
      In order to maintain the consistency of the mounting orientation of the parts with the machine coordinate system and the programmed coordinate system, the hydraulic clamp carrier should ensure the directional installation on the machine tool, and also coordinate the coordinate between the part positioning surface and the machine tool.
       When the production volume is small or developed, the universal combination fixture should be widely used. Only when the combination fixture cannot be solved, other fixtures should be considered. Special fixtures can be considered in small batch or batch production, but it should be as simple as possible. The hydraulic clamp carrier frame can ensure the accurate positioning and firm clamping of the workpiece at the specified position, and can reduce the vibration and deformation during processing through the floating support, and can also be used to close the machining by the automatic control of the pressure plate. Clamping position.
      The hydraulic clamp carrier can withstand large cutting forces during roughing, as well as accurate positioning during precision machining, as well as support, clamping and quick release that cannot be done with manual clamps. Whether it is a simple hydraulic jig or a complex overall production line, the design process of the hydraulic jig is the same, in turn, the overall plan, the choice of hydraulic cylinder type specifications, the choice of control valve, the design of the mechanical part, the pump Station attachment selection, system connection.
      The hydraulic clamp carrier provides powerful clamping and positioning force for various machining processes. The cylinder is used for punching and clamping during the automatic machining process. The support cylinder can prevent deformation during product processing, from simple fixing to robot-assisted machining center. Hydraulic clamp carrier are available.