Things to be aware of in the sliding table saw operation

     The sliding table panel saws uses a precision cylinder as a track, which is simple and convenient, and has high precision. Suitable for small material cutting, acrylic, metal crafts processing. The conventional installed power is 2.2KW/380V motor. If the customer has special needs, it can also change the 220V motor. Sliding table panel saw belongs to the push table width 90 degrees saw blade vertical up and down can only cut right angle, cutting function solid wood plywood acrylic sheet, etc., used to produce panel furniture, 45 degree machine: saw blade can be inclined at 45 degrees, right angle universal type, Used for solid wood furniture panel furniture. According to the model that the pro-self needs to choose, the sliding table saw body is welded by high-strength iron plate, and the push-table is the sturdy and durable one-piece aluminum ingot, which is not easy to be deformed.

    Note on the sliding table panel saws:

    1. Clean the table and the table top around the table saw.

    2. Check if the saw blade is sharp and the size saw blade is on a line.

    3. Test machine: The time is about 1 minute. See if the machine is running normally. Check the rotation direction of the saw blade to ensure that the saw blade rotates in the correct direction.

    4. Place the prepared plate on the pusher and adjust the gear size.

    5. Start cutting.

    Note: A. The plate should be close to the block and not moveable;

    B. According to the thickness and hardness of the plate, adjust the cutting speed, and push the machine at a constant speed, not too fast.

    C. When the small material is opened, the wooden strip is pressed and pushed forward.

    D. The operator should wear a mask, can not wear gloves, can not wear loose clothes, can not leave long hair.

    E. Do not take the object directly by the rotating saw blade. If necessary, use other long accessories to push it away.

    6. If the corners of the plate are defective, consider replacing the blade.

    7. After the cutting task is completed, turn off the power and do the 5S of the sawing table and the surrounding area.

    In addition to the necessary control tasks, the sliding table saws operator also has to overcome the unfavorable posture of standing and bending for a long time, as well as the impact on the body caused by poor working environment such as manual lifting, vibration and noise with a large load. The sliding table panel saw is particularly serious in the operation of the woodworking table saw. The fatigue of the job will not only cause the work efficiency to drop, but also cause human error and the waist injury of the operator. There may be hidden dangers.