multi rip saw is an excellent wood processing equipment

    The multi rip saw can cut logs, semi-logs, square timbers, etc. within the caliber, and can cut a log into a plurality of pre-adjusted plates at a time, with high automation. Since the thickness of the saw blade used is 2.5-3.5mm, compared with the thickness of the general saw blade of 4.5-5.5mm, the sawing sawing loss is reduced by 46% compared with other sawing machines, and the yield is as high as 76% to 80%. The wood utilization rate is about 27% higher than other similar sawing machines. The sawing process is stable, the thickness of the sawing plate is accurate, the surface is smooth and evenly flat, and the semi-finishing process of the wood surface can be reduced. At the same time, because the total power of the multi rip saw motor is small, the power consumption of the device is reduced by 25% to 40%, which is an energy-saving machine.

    First, the multi-saw saw design features

    Chassis: It adopts thick-walled rectangular square tube to balance the stress and load on all parts. The drive system and the main hole surface of the main shaft are cut at one line to ensure the same flatness and verticality!

    Spindle: Multi-piece saw with high quality material, disposable through hole, quenched and tempered, chrome plated, ground, dynamic balance treatment, high stability, wear resistance, corrosion resistance!

    Bearing: imported brand, waterproof, anti-tip heating assembly. Long service life and flexible rotation.

    Saw blade: For the processing of materials, select different specifications of alloy saw blades, wear-resistant, heat-resistant, and not deformed.

    Cooling: The rear axle sprays water and is effective in place.

    Feeding: 8-axis or 10-axis active design. Multi-slice sawing active feed roller, upper fulcrum type, or lifting pressure roller. Intelligent speed regulation, smooth feeding, uniform and smooth sawing.

    Second, the main features of multi-chip saw:

    1, the whole process of automatic feeding, left and right axis structure, multi-piece sawing, continuous discharge, 5-6 times better than the band saw, and the sawing road is thinner than other Multi Rip Saw.

    2. The multi rip sawing process is stable, the sawing precision is high, the surface is smooth and flat, and no further planing is needed to reduce wood waste.

    3, V-type device feeding, automatic centering, greatly improving the yield.

    4, the operation is simple, only responsible for discharging and receiving materials, the entire process of automatic feeding, ordinary workers can operate.

    5, the equipment is firm and stable, and the performance is stable.

    6, double bulletproof design, there will be no wood rebound.

    7. Sprinkler design after the spindle, multi-saw saw operation and maintenance is convenient, the shaft core water spray technology, dustproof and environmental protection, not easy to block, protect the saw blade, can ensure the saw blade continues to work, and extend the saw blade use time.

    8, with power extension conveyor rack, strong and powerful, reducing the labor intensity of workers, sawing logs more stable.

    9, strong and powerful gear drive feed feeding, three years without failure.

    10, high quality imported drive chain, durable.