The horizontal band saw machine is composed of a saw frame, a parallelogram adjusting device or four screw adjusting devices, a sawing machine, a track and a lifting bracket. When the machine is working, the wood is fixed, the track is fixed on the wood, the saw machine is installed on the track, and the thickness of the processed wood is adjusted by the parallelogram adjusting device to make the horizontal band saw cut along the wood. Not only the light and labor-saving processing of large and long wood, but also the quality is guaranteed. Horizontal band saws are widely used in sawmills, shipyards and mountain wood harvesting sites for flow processing.
First, the horizontal band sawing machine safe use procedures
The sawing machine uses a saw as a tool, and the sawing or band saw reciprocating or the circular saw rotating motion to saw the cut wood. Common sawing machines include band saws and circular saws. The horizontal band sawing machine injury accident mainly includes saw cutting damage, saw blade break ejection, and wood hit damage. Sawing damage is prevented by the use of safety guards and proper operation.
1 Band saw blade thickness should be compatible with the matching band saw wheel. Avoid the use of large thickness saw blades for small wheels, causing breaks and injuries.
2 The serrations should be sharp and the depth of the teeth must not exceed 1/4 of the width of the saw blade.
3 Band saw blade welding should be firm and flat, the joint wood should be more than 3, the length between the two joints should be more than 1/5 of the total length, the joint thickness should be consistent with the thickness of the saw blade.
4 Strictly control the transverse crack of the band saw blade. If the crack is too long, it should be cut and re-welded (see Table 1).
The track of the 5 horizontal band saw machine should be straight, with the limit switch at both ends, and warning bars should be set on both sides of the sports car.
Second, the maintenance method of horizontal band sawing machine:
1. When using the horizontal band sawing machine, do not increase or decrease the speed of the pulverizer casually, which will easily cause accidents. Woodworking horizontal band saw, remember not to suddenly speed up, suddenly slow down to use. To control the use of traffic.
2. The horizontal band saw machine is not allowed to prevent other objects. Parts that are often used by small tools cannot be placed on a sawmill. When you hear an abnormal sound, do not disassemble the sawmill to check it. Always turn off the power and wait until the machine stops running.
Check.
3. When we use it, we should check it regularly to add lubricating oil, lubricants, grease, etc. to the machine parts. In general, it is good to check once in about two weeks to add lubricant to the parts. Make the machine work properly. It is easy to operate.
4. Remember to clean up and clean the parts and screws after the end of each day. If you find that the horizontal band sawing machine has serious wear and needs to be replaced, it should be replaced in time to avoid danger.